5
Quick Start Guide – For HDMI/PC/Mac
1. Plug in the receiver (RX) to your TV, monitor, or
projector via HDMI.
2. Connect the USB-C port of the receiver (RX) to a
USB port or power supply for power (required).
3. Ensure the receiver (RX) is in “PC/HDMI/AirPlay”
mode. (At the top of the screen, it should say
“PC/HDMI/AirPlay Mode.”) If not, press the button
on the receiver (RX) once to switch to
“PC/HDMI/AirPlay” mode.
4. Connect a transmitter (TX) to your PC or Mac’s
(or other HDMI device’s) HDMI output port. The
device supports up to 4K30 input.
5. IMPORTANT NOTE: Your PC or Mac may or
may not provide enough power via the HDMI port
to power the transmitter (TX). You may also need
to use one of the included USB-C power cables to
provide enough power to the transmitter (TX) via
To Next Page
Loading...