9
Quick Start Guide – For Android
Phones/Tablets
1. Unplug & disconnect any transmitters (TX).
2. Plug in the receiver (RX) to your TV, monitor, or
projector via HDMI.
3. Connect the USB-C port of the receiver (RX) to a
USB port or power supply for power (required).
4. Ensure the receiver (RX) is in “Miracast” mode.
(At the top of the screen, it should say “Miracast
Mode.”) If not, press the button on the receiver
(RX) once to switch to “Miracast” mode.
5. On your Android phone or tablet, you may need
to activate the Miracast function. The Miracast
function on different brands of phones/tablets
may be named differently. For example: WIFI
Display, WLAN Display, Wireless Display,
Allshare Display, Allshare Cast, Wireless Display.
To Next Page
Loading...