Page 4
Step 2: Mounting The Lights / Crash Bar Mount
Mounting The Lights: (Crash Bar)
• Mounting the Krista to the Crash Bar is very simple. Pre-assemble
the lights, and mounting bracket loosely with the supplied parts. Locate
where you would like the light to be pointing and the orientation of either
on top or hanging below the bar. Snug the bolts on the clamp so you
can now adjust the alignment of your lights. When using the M10 single
mount, you can adjust the light left and right allowing a wider range of
motion and sight. Use the M6 double clamp mount when wanting a more
rigid and straight aimed light set up.
M10 Single MountM6 Double Mount
To Next Page
Loading...