Clevo NL41CU - Removing the CCD

Disassembly
2 - 12 Removing the CCD
2.Disassembly
Removing the CCD
1. Turn off the computer, turn it over to remove the battery (page 2 - 5).
2. Lift up the inner frame and run your fingers around the inner frame of the LCD panel at the points as indicated by
the arrows - (Figure 6a).
3. Lay the computer down on a flat surface with the top case up forming a 90 degree angle. Carefully lift and remove
the LCD front cover upwards (Figure 6b).
1
4
5
4
b.
a.
3
2
4
1
2
4

5. LCD Front Cover
Figure 6
CCD Removal
a. Run your fingers around
the inner frame of the
LCD panel at the points
indicated by the arrows.
b. Lay the computer down
on a flat surface with the
top case up forming a
130 degree angle. Lift
the LCD front panel up-
wards.