Clevo NL50CU - Page 32

Disassembly
2 - 8 Removing the Hard Disk Drive
2.Disassembly
5. Remove screws - and bracket from the hard disk (Figure 4d).
6. Reverse the process to install a new hard disk (do not forget to replace the screws).
6
7
8
9
d.
7
9
8
6

HDD System Warning
New HDD’s are blank. Before you begin make
sure:
You have backed up any data you want to
keep from your old HDD.
You have all the CD-ROMs and FDDs re-
quired to install your operating system and
programs.
If you have access to the internet, download
the latest application and hardware driver up-
dates for the operating system you plan to in-
stall. Copy these to a removable medium.

6. Bracket
7. HDD
•2 Screws
Figure 4
HDD Assembly
Removal (cont’d.)
d. Remove the screws and
bracket from the HDD.