Clevo W540EU - Page 33

Disassembly
Removing the Optical (CD/DVD) Device 2 - 9
2.Disassembly
4. Remove the screw at point (Figure 5c).
5. Use a screwdriver to carefully push out the optical device
at point (Figure 5d).
6. Insert the new device and carefully slide it into the computer (the device only fits one way. DO NOT FORCE IT; The
screw holes should line up).
7. Replace the component bay cover and screws.
8. Restart the computer to allow it to automatically detect the new device.
6
8
7

8. Optical Device
•1 Screw
7
d.
8
c.
6
7
Figure 5
Optical Device
Removal (cont’d.)
a. Remove the screw at
point .
b. Use a screwdriver to
carefully push out the
optical device at point
.
6
7