Clevo W540EU - Removing the 3.75 G Module

Disassembly
2 - 18 Removing the 3.75G Module
2.Disassembly
Removing the 3.75G Module
1. Turn off the computer, turn it over, remove the battery (page 2 - 12) and the component bay cover (page 2 - 10).
2. The 3.75G module will be visible at point on the mainboard (Figure 14a).
3. Carefully remove the screw
(Figure 14b).
4. The 3.75G module (Figure 14c) will pop-up, and you can remove it from the computer (Figure 14d).
Figure 14
3G Module Removal
a. Locate the 3.75G mod-
ule.
b. Remove the screw.
c. The module will pop-up.
d. Remove the 3.75G mod-
ule.
1
2
3
b.
c.
a.
2
3
d.
3
1
a.

Power Button Cable
The power button cable is underneath the 3G
module. When disassembling the mainboard,
the power button cable must be disconnect-
ed.

3. 3.75G Module
•1 Screw