ensure sufficient ventilation, observe the installation
recommendations provided.
• In order to avoid fire risk, wherever possible, ensure that the
appliance is not in contact with walls or with any hot element
(compressor, condenser). Observe the installation
recommendations.
• The appliance should not be placed close to radiators or
cooking hot plates or gas rings.
• Check that electrical sockets remain accessible when the
appliance is installed.
• When positioning the appliance, ensure the supply cord is not
trapped or damaged.
Power saving
To limit the electricity consumption of your appliance:
✓ Install it in an appropriate place (see “Installation
instructions”).
✓ Leave the doors open as little time as possible.
✓ To ensure that the appliance operates properly, clean the
condenser regularly (see “Maintenance”).
✓ Regularly inspect the door seals and ensure that they are
still closing properly. If this is not the case, contact your
after-sales service.
✓ The following combination of shelves is recommended for
energy to be used as efficiently as possible by the
refrigeration unit. There are four shelves and one display
shelf in total.
To Next Page
Loading...
Need help?
General
