42
5. OPERATING INSTRUCTIONS
Control panel
Attention: if the air conditioner is restarted immediately after shutdown in cool mode, 3min protection time
is necessary before automatic start.
1.
Power key
Press the key to turn ON/OFF the A/C.
2.
Mode key
Selects the appropriate operating mode. Each time you press the button, a mode is
selected in a sequence that goes from COOL, FAN, DRY, and AUTO(on some models).
The mode indicator light illuminates under the different mode setting.
NOTE: On above modes, the unit operates the auto fan speed automatically. You can
adjust the speed only with remote controller for COOL and FAN.
3.
Up and Down key
Used to adjust (increasing/decreasing) temperature settings in 1°C/2°F(or 1°F)
increments in a range of 17°C/62°F to 30°C/88°F (or 86°F).
NOTE: The control is capable of displaying temperature in degrees Fahrenheit or degrees
Celsius. To convert from one to the other, press and hold the Up and Down buttons at the
same time for 3 seconds.
To Next Page
Loading...
Need help?
General
