Need help?Do you have a question about the CLIVET WSAN-EE 151 and is the answer not in the manual?
Guidance on following manual instructions and requirements for qualified personnel.
Identification of hazardous zones and safety procedures for unit handling and installation.
Outlines general risks and critical electrical safety measures to prevent shocks and fires.
Details on R-410A properties, hazards, first aid, and safety measures during operation.
Covers physical properties, reactivity, toxicity, disposal, transport, and legal norms for refrigerants.
Procedure for checking the unit for transit damage or missing parts.
Factors for installing air-conditioning systems, including space and connections.
Importance of clearances for operation/maintenance and choosing a suitable installation site.
Guidelines for piping, installing valves, and insulating tubes for optimal water connection.
Safety and procedural guidelines for qualified personnel performing electrical connections.
Essential checks before unit start-up, including installation, power, and system integrity.
Verifying refrigerant circuit, water system, and electrical connections prior to initial operation.
Importance of activating crankcase heaters before the first start-up or after long shutdowns.
Procedures for checking tensions, absorptions, compressor, water flow, and refrigerant circuit parameters.
Functions for modifying set points based on external factors and compressor limits.
Classification of alarms and procedures for resetting them.
List of parameters accessible via the remote or service keyboard.
Information on alarm types and the importance of identifying and eliminating causes before resetting.
Lists potential causes for various alarms like pressure issues, faulty probes, and transducers.
Guidelines for periodic inspections by authorized centers.
Common causes for high/low pressure alarms and faults related to probes and transducers.
Troubleshooting for compressor, fan, pump protection, and heating pressure alarms.
Procedures for safely disconnecting the unit, including refrigerant recovery.
To Next Page
General