CM probe English 2019/02 DK
not the moisture content of the skin. Tests to find out how long the moisture content is
increased by the product should be performed every hour or more often.
Moisture underlies external and internal influences. Always design a detailed testing
protocol and try to keep constant as many factors as possible.
CM 6 – Hydration Measurement
Place the Corneometer
®
-probe head straight on the skin area to be measured
according to the pressure of the spring in the probe. Hold it still. The measurement is
triggered by the skin contact and after one second the result is displayed
accompanied by an acoustical signal.
For the next measurement proceed in the same way.
Display example from MPA-software MDD 4 - Multi Display Device
For more details on the display of the measurement results please read the
instruction manual for the MPA software, or the Multi-Display Device MDD 4.
To Next Page
Loading...