CM probe English 2019/02 DK
The probe head is very sensitive. Make sure that it is never hit on hard surface.
Never open the probe.
CM 9 – Errors in the Corneometer
®
Measurement
„Corneometer value too high/low“, „Mathematic overrun“:
Check the connection between device and probe.
If these messages occur frequently the probe has to be sent for repair in its original
packaging (without accessories and device, just unplug the probe). Please always
include a detailed service request/error description. A service request form can be
downloaded from the C+K website: www.courage-khazaka.de (service form).
CM 10 - Technical Data of the Corneometer
®
CM 825
Measurement principle: capacity
Units: arbitrary Corneometer
®
units
Dimensions: probe approx. 11 cm long, Weight: approx. 41 g, Measurement head:
49 mm², Cable: approx. 1.30 m
Measurement time: 1 s.
Frequency: 0.9-1.2 MHz, Pressure: approx. 1 N ± 10%, Accuracy: 3 %
Operation conditions – the probe works securely at least under the following
conditions:
Temperature & relative humidity: T: 5-40° C, RH: 30-70 % RH
Optimal working conditions: 20 C, 50 % RH
Use: in closed rooms
Altitude: below 2000 m
Storage conditions: T: 0-70° C, RH: 0-80 % RH
Applicable pollution degree: 2 (in the intended environment)
Technical changes may be made without prior notice.
The current declaration of conformity can be obtained from the download customer
area of the C+K website www.courage-khazaka.de/Downloads (register/log-in as a
customer) or directly from C+K.
Please contact us for questions and additional information:
COURAGE + KHAZAKA electronic GmbH
Mathias-Brüggen-Str. 91, 50829 Köln, Germany
Phone: +49-221-956499-0, Fax: +49-221-956499-1
info@courage-khazaka.de, www.courage-khazaka.de
To Previous Page
Loading...