To Next Page
T
Taylor MorganAug 17, 2025
What to do if the CME Medical Water Pump shows 'Down Occlusion'?
- RRhonda SandovalAug 17, 2025
If the CME Medical Water Pump displays a 'Down Occlusion' error, it could be due to several reasons. First, check if the roller or clip on the administration set is closed downstream of the pump and open it. Next, ensure the administration set is not kinked; straighten it if necessary. Also, the cannula might be blocked, so consider changing it. Finally, the administration set might be loaded incorrectly, so try reloading the IV line following the instructions.
General