12/38
2. Use your own USB cable to connect your plug-and-play USB MIDI
device to the USB-A port of H4MIDI WC. If you want to connect
multiple USB MIDI devices at the same time, please use a USB Hub.
3. Use a MIDI cable to connect the MIDI IN port of the H4MIDI WC to the
MIDI Out or Thru port of other MIDI devices, and connect the MIDI
OUT port of the H4MIDI WC to the MIDI IN of other MIDI devices.
4. When the power is on, the LED indicator of H4MIDI WC will light up,
and you can now send and receive MIDI messages between the
connected USB MIDI device and MIDI device according to the preset
signal routing and parameter settings.
Note
：
H4MIDI WC has no power switch, you just need to power it on to start
working.
⚫ Use H4MIDI WC to connect external MIDI devices to your
computer
1. Use the provided USB cable to connect the H4MIDI WC to the USB
port of your computer. Multiple H4MIDI WCs can be connected to a
computer via a USB Hub.
2. Use a MIDI cable to connect the MIDI IN port of the H4MIDI WC to the
To Next Page
Loading...
