U2MIDI Features:
z Cable-like USB MIDI interface providing 1 MIDI IN port and 1 MIDI OUT
port, USB 2.0 full speed transmission.
z Support multi U2MIDIs working simultaneously.
z MIDI-to-USB plug-and-play, no driver required, USB class-compliant.
z USB bus powered, with an indication LED.
System Requirements:
z PC with Windows XP / Vista.
z Mac OS 9.0.4 or higher.
z Computer with USB port.
How to use:
1. Please quit all MIDI-Sequencer software (like: Cakewalk, Sonar, Cubase,
etc.) which is running on your computer before install the U2MIDI.
2. Plug U2MIDI’s USB connector to the USB port of the computer. You will
see the LED display of U2MIDI is lit. The U2MIDI gets the power from the
computer via USB bus.
3. After Hardware installation is done properly, your PC or MAC computer
will automatically detect the U2MIDI and install the default system driver.
4. Plug U2MIDI’s MIDI IN connector to the MIDI OUT port of your MIDI
equipment. And plug U2MIDI’s MIDI OUT connector to the MIDI IN port of
your MIDI equipment.
5. Select “USB Audio Device” in the MIDI-Sequencer software as the MIDI
device on PC.
6. Select “CME U2MIDI” in the MIDI & Audio Device Setup as the MIDI
device on MAC.
7. The LED will be coruscating when the U2MIDI is transferring the MIDI
Data via the MIDI IN/OUT port.
8. Other U2MIDIs can be plugged into the computer when you need more
MIDI IN/OUT ports. The U2MIDIs will be named as “USB Audio Device [1]”,
“USB Audio Device [2]”, “USB Audio Device [3]”, etc.
9. Close the MIDI-Sequencer software which is accessing the U2MIDIs. Find
“USB Audio Device” in the Windows Device Manager, stop or uninstall it.
Now you can unplug the U2MIDIs’ USB connectors from the computer.
To Next Page
Loading...
Need help?
General
