10 / 19
⚫ Connect WIDI Uhost with Bluetooth MIDI device
Video instruction: https://youtu.be/7x5iMbzfd0o
1. Turn on both the MIDI devices plugged with WIDI Uhost as well as the
Bluetooth MIDI devices.
2. WIDI Uhost will automatically pair with the Bluetooth MIDI device, and
the blue LED will change from slow flashing to constant light (when
there is MIDI data sending, the LED light will flash dynamically)
Note: If WIDI Uhost cannot automatically pair with another Bluetooth MIDI device, it
may be caused by a compatibility issue. In that case, please contact CME for
technical support.
⚫ Connect WIDI Uhost with macOS X via Bluetooth
Video instruction: https://youtu.be/bKcTfR-d46A
1. Turn on the power of the MIDI device with the WIDI Uhost plugged in,
and confirm that the blue LED flashes slowly.
2. Click the [Apple icon] on the upper left corner of the screen, click the
[System Preferences] menu, click the [Bluetooth icon], and click
[Turn Bluetooth On], then exit the Bluetooth settings window.
3. Click the [Go] menu at the top of the screen, click [Utilities], and click
the [Audio MIDI Setup]
Note: If you don't see the MIDI Studio window, click the [Window] menu at the top
of the screen and click [Show MIDI Studio].
4. Click the [Bluetooth icon] at the upper right of the MIDI studio
window, find the WIDI Uhost that appears under the device name list,
and click [Connect]. The WIDI Uhost ’s Bluetooth icon will appear in
the MIDI studio window, indicating successful connection. You can
exit all setting windows then.
To Next Page
Loading...
