12 / 19
know, only Cakewalk by Bandlab currently integrates this API, so it can directly
connect to WIDI Uhost or other standard Bluetooth MIDI devices.
Of course, there are some alternative solutions for MIDI transmission
between the Windows 10 Bluetooth MIDI driver and music software through
virtual MIDI port driver, such as Korg BLE MIDI driver. Starting from the
firmware version v0.1.3.7, WIDI is fully compatible with the Korg BLE MIDI
Windows 10 driver. It can support multiple WIDIs connected to Windows 10
computers at the same time with two-way MIDI data transmission. The
operations are as follows:
Video instruction: https://youtu.be/JyJTulS-g4o
1. Please visit Korg official website to download the BLE MIDI Windows
driver.
https://www.korg.com/us/support/download/driver/0/530/2886/
2. After decompressing the driver files with the decompression software,
click the exe file to install the driver (you can check whether the
installation is successful in the sound, video, and game controller list
of the device manager).
3. Please use the WIDI App to upgrade the firmware of the WIDI device
to v0.1.3.7 or later (for upgrade steps, please refer to the relevant
instructions and videos on BluetoothMIDI.com). At the same time,
please set the upgraded WIDI BLE role to "Forced Peripheral" to avoid
automatic connection when multiple WIDIs are used at the same
time. If necessary, you can rename each WIDI after the upgrade, so
that you can distinguish between different WIDI devices when you
use them at the same time.
To Next Page
Loading...
