GB
25
measures are necessary or not. Factors which affect the current immission
levels at the workplace, include the type of room, other sources of noise,
e. g. the number of machines operating and other processes taking place in
the vicinity. Permitted workplace values can differ from country to country.
This information is designed to help the user to better assess the dangers
and risks. Determination of noise emission values in accordance with
EN 60745-1.
**) The specified vibration emission value was measured in accordance with a
normed test procedure and can be used in order to compare one tool with
another. The specified vibration emission value can also be used for an
introductory evaluation of the exposure. The vibration emission value may
fluctuate from the specified value during actual use of the power tool. These
fluctuations will depend on the way in which the power tool is used. Try to
keep vibrations to a minimum. One method of reducing the vibration load is,
for example, limiting the length of time you work with the tool. All parts of the
operating cycle must be taken into account for this purpose (for example,
also including times in which the power tool is switched off and times in
which it is switched on, but is running without load). Determination of vibra-
tion emission values in accordance with EN 60745-1 & EN 60745-2-13.
Accessories
Accessories are available from your local vendor.
To Next Page
Loading...
Need help?
General
