Need help?Do you have a question about the CNH CASE IH AFX8010 and is the answer not in the manual?
General| Brand | CNH |
|---|---|
| Model | CASE IH AFX8010 |
| Category | Utility Vehicle |
| Language | English |
Provides instructions for operator safety and those working nearby.
Statement intended for machine safety, preventing minor damage.
Locates identification plates for combine, engine, and attachments.
Details how to safely access various parts of the combine.
Overview of controls and instruments within the operator's cab.
Details the function of the steering column controls and foot pedals.
Explains the operation of the lever for controlling ground speed and direction.
Pre-operation checks and preparations before moving the combine.
Instructions for operating the combine during field or road transport.
Explains the rotor cage area's role in threshing and separating grain.
Procedure to accurately check combine performance.
Explains how to determine and reduce grain losses by checking specific areas.
Step-by-step guide for connecting the header to the combine.
Saves and defines header types and configurations.
Controls the alarm that alerts the operator to header height above stop height.
Sets the header stop height position for area counting and audible alarms.
Automatic process to calibrate header height sensors.
Four-position switch for controlling reel movement.
Manual control of reel speed via a switch and knob.
Explains manual and auto modes for controlling header height.
Details the five operating modes for the feeder drive.
Procedure to rotate the rotor forward/reverse to free a stalled rotor.
Explains different sieve types like CLOSZ SLAT, PETERSON SLAT, CORN SLAT.
Adjusts cleaning fan speed electrically for crop, chaff, and moisture.
Positions the bubble-up tube for field use or road transport.
Covers over augers adjusted to regulate unloading rate.
Configures residue handling in three modes: spread, windrow straw/spread chaff, windrow all.
Configures the AFS system for yield monitoring.
Adjusts crop-specific values like trade moisture and weight.
Compensates for extra feet counted when entering/leaving fields.
Learns machine and crop characteristics for yield monitor accuracy.
Selects the crop type for calibration.
Learns the relationship between flow sensor data and crop weight.
Examines loads with % Error above guidelines and provides correction steps.
Selects active farm, field, load, and crop for data recording.
Provides a step-by-step guide for correct harvest operation.
Importance of adequate lubrication for equipment longevity and efficient operation.
Outlines daily, hourly, and yearly maintenance tasks.
Procedure for changing engine oil and filters every 300 hours.
Procedure for replacing engine coolant every 1200 hours.
Procedure for changing hydraulic oil and filters every 1200 hours.
Checking belt and chain tensions every 50 hours.
Daily cleaning and periodic checks of parking brake.
Location and replacement guidelines for fuses and relays.
Identifies and corrects issues with the feed auger and chain.
Troubleshooting common engine issues like starting, power, overheating.
General troubleshooting guide for common conditions and required actions.
Comprehensive steps for storing the combine at the end of the season.
Steps to ensure the machine is in good condition and ready for use each season.
Lists available feeder accessories like perforated floor and rock trap kits.
Equipment to cut straw residue.
Provides approximate tire specifications.
Specifications for various header types.
Provides overall dimensions of the combine.
Checklist for initial 50-hour service and adjustments.
Report form for documenting machine delivery and initial instructions.
To Next Page