Cobra 148GTL-DX - Cobra 148 GTL-DX Maintenance

Section V
Maintenance and Adjustment
The COBRA 148GTL-DX transceiver is specifically designed for the environ
ment encountered in mobile installations. The use of all solid state circuitry and
its light weight resuit in high reliability. Should a failure occur, however, replace
parts only with identical parts. Do not substitute. Refer to the sehcmatic dia
gram and parts list.
- ---------------------------------- N0TE ------------------------------------------
If the performance described in the OPERATION and MAINTENANCE
AND ADJUSTMENT sections is not obtained, review the operating
instructions to insure that proper procedures were followed. If a prob
lem still exists, refer to WARRANTY SERVICE INSTRUCTIONS
elsewherre in this manuał.
-21 -