C148G7TL DX ALIGNMENT PROCEDURE
STEP PRESET ТО ADJUSTMENT REMARKS
9
Same as Step 8,
CH : 40
Mode : USB
L23 Adjust for 16.0425MHz + or - 20Hz.
10
Same as Step 9,
CH : 40
Mode : LSB
L24
Adjust for 16.0375MHz + or - 20Hz.
11
Same as Step 1
CH : 40
Band : HI
L40
Adjust for 16.940MHz + or - 20Hz.
12 Same as Step 11
CH : 40
Mode : USB
L41
Adjust for 16.9425MHz + or - 20Hz.
13 Same as Step 12
CH : 40
Mode : LSB
L42
Adjust for 16.9375MHz + or - 20Hz.
14 Same as Step 1
Π: 40
TX Mode
L47
Connect Frequency Counter to TP4 (R114).
Adjust for 10.695MHz + or - 5Hz.
15
Same as Step 1
CH : 40
Mode : USB
L48
Connect Frequency Counter to TP5 (lead of
R39). Adjust for 10.6925MHz +5Hz - 0Hz.
16
Same as Step 15
CH : 40
Mode : LSB
L49
Adjust for 10.6975MHz +0Hz -5Hz.
Note:
Two TP4 are noted on Precedure.
One is R83 and the other one is R114.
9
To Next Page
Loading...
