Cobra 15 BAND XRS 9670 - Page 28

- .
• 4
Your Detector
Setting Dim Default
You can set the default level for Dim mode (Dim, Dimmer or Dark)
either in Program mode or directly using the SelectlDim button .
.... Dim~.
. Press
..... and hold
Da.rk Select/Dim
. button
· ~immer
(i) Select/Dim
Button
Cycles - see chart above One beep each time the
display cycles
To Set the Display Dim Mode Default Directly Using the Set/Dim Button
Press and hold the
Select/Dim button.
Release the Select!
Dim button to select
the current display as
default.
None
Dim, Dimmer or Dark
Tone Visual Display
Dim Two beeps
To Set the Display Dim Mode Default Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to Display Dim,
Dimmer or Dark.
One beep Dimmer
One beep Dark
~ English