FRONT
UPPER AND
LOWER
WISHBONES
1. Front Wishbone C.66804.
2. Upper Ball joint.
3. Lower Ball joint.
4. Lower Wishbone B.66815-6.
5. Metalastic Bush 13-935, Bolt D-67179,·r B.S.F. Self-locking Nut.
6. Wishbone Pivot Cup D.66819, Metalastic Bush 13-935, Bolt D-67179,
f'
B.S.F. Self-locking Nut, Wishbone Pivot Cup D.66819.
(
FRONT SUSPENSION WISHBONES
The front upper and lower wishbones are attached to the chassis
points by rubber bushes. The recessed washers are inserted from the
outside top wishbone with the mounting bolts inserted from inside the
wishbone.
The recessed washers are inserted from inside the lower wishbone
with the mounting bolt pushed through from outside.
PHOTOGRAPH FRONT SUSPENSION
('
23
To Next Page
Loading...