-MENU-
DISPLAY MHz
AUTO POWER
BACKLIGHT
CONTRAST
-MENU-
KEY TONE
AUDIO ROUTING
TX NR
RX NR
WX Auto Scan (ON / OFF)
WX AUTO SCAN when enabled will look for and lock on to the
strongest weather station signal. This happens in the background
and is useful for cross-country travel. To enable/disable WX AUTO
SCAN:
1. Press and hold the ENT/MENU button
on the All Road handset
to active the MENU
2. Select WX AUTO SCAN
from the Menu Options
3. Use the UP or DOWN arrow to select ON or OFF,
press ENT to
select
4.
Press the ESC button to get back to the home screen
Display MHz (ON / OFF)
Displays the frequency of the current CB or weather channel.
To turn DISPLAY MHz ON or OFF:
1. Press and hold the ENT/MENU button
on the All Road handset
to active the MENU
2. Use the DOWN arrow to DISPLAY MHZ
from the Menu Options
3. Use the UP or DOWN arrow to select ON or OFF,
press ENT to
select
4.
Press the ESC button to get back to the home screen
Auto Power (ON / OFF)
When Auto Power is enabled, it allows the radio to turn itself on
when power is restored from the vehicle. When AUTO POWER is
set to OFF, the radio will need to be manually powered ON when
the vehicle is started up. To adjust the AUTO POWER setting:
1. Press and hold the ENT/MENU button
on the All Road handset
to active the MENU
2. Use the DOWN arrow to select AUTO POWER
from the Menu
Options
3. Use the UP or DOWN arrow to select ON or OFF,
press ENT to
select
4.
Press the ESC button to get back to the home screen
NOTE: This feature only works if the radio is left ON when the
vehicle is turned off. If the radio is OFF when power is cut from the
radio (when you turn your vehicle off), your radio will not automati-
cally turn ON, even when AUTO POWER is enabled.
15
14
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Menus
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Menus
-MENU-
TIME OUT TIMER
WX ALERT
WX ALERT SCAN
WX AUTO SCAN
-MENU-
DISPLAY MHz
AUTO POWER
BACKLIGHT
CONTRAST
-MENU-
DISPLAY MHz
AUTO POWER
BACKLIGHT
CONTRAST
-MENU-
DISPLAY MHz
AUTO POWER
BACKLIGHT
CONTRAST
Backlight (OFF - High)
The purpose of display backlight is to increase readability. To
adjust the backlight:
1. Press and hold the ENT/MENU button
on the All Road
handset to active the MENU
2. Use the DOWN arrow to select BACKLIGHT
from the Menu
Options
3. Use the UP or DOWN arrow to increase or decrease the
backlight,
press ENT to select
4.
Press the ESC button to get back to the home screen
Contrast (OFF - High)
Contrast adjusts the brightness of the backlight. To find the right
contrast setting:
1. Press and hold the ENT/MENU button
on the All Road
handset to active the MENU
2. Use the DOWN arrow to select CONTRAST
from the Menu
Options
3. Use the UP or DOWN arrow to increase or decrease the
contrast,
press ENT to select
4.
Press the ESC button to get back to the home screen
Key Tone (ON / OFF)
KEY TONE is an option to have key tone sounds when the buttons
are pressed. To enable/disable:
Instructions:
1. Press and hold the ENT/MENU button
on the All Road
handset to active the MENU
2. Use the DOWN arrow to select KEY TONE
from the Menu
Options
3. Use the UP or DOWN arrow to turn ON or OFF,
press ENT to
select
4.
Press the ESC button to get back to the home screen
To Next Page
Loading...
