Cobra CIR 1000 A - Connecting to Wired Network; Step 1 - Power up Radio; Step 2 - Choose LAN Setting

6
Connecting to wired network
Step 1 - Power up Radio
First, connect to your Internet Radio adaptor and ensure the Power LED is lighting up. The Radio can
be switched on or off with the STANDBY/ON button.
Later, it will say:
 Note: Make sure LAN cable is connected to the LAN socket.
Step 2 – Choose LAN Setting
1. Rotate the Scroll knob to <System setup>, and press to confirm.
2. With the cursor pointing to <Internet setup>, press to confirm, and then rotate the Scroll knob to
<Manual settings>, and press to confirm.
3. With the cursor pointing to <Wired>, press to confirm, and then rotate the Scroll knob to <DHCP
enable>, and press to confirm.