Cobra Deluxe series - Chapter 6. Setup; 6-1 Time; 6-1-1 Time Sync; 6-1-2 Date and Time

50
Chapter ６. Setup
６-１ Time
※ Function Description
1. Time Synchronization
1) Synchronization with the NTP server
The time is synchronized once every hour with the NTP Server.
A. Automatic Setup
The nearest server from the user’s zone will be selected for connection. If the connection fails, the next
nearest server will be chosen.
B. User Setting
The user sets the URL or IP for the NTP server. If connection is not established, a message will be sent to
the user, and the related log, saved.
If synchronization with the NTP server fails, synchronization with RTC will be established.
2. Daylight Saving Time (DST) Setup
Regardless of whether NTP server or DST server is referred to, DST is automatically processed according
to the time.
3. Time Setup by User
The user can set the time directly.
For the NTP client setup, the user can read the time but not change it.
※ Move to {Menu}  {Setup}  {Time} to set up time functions.
[Figure 6-43. Setup / Time Menu]
６-１-１ Time Sync
① Select Time Sever / Sever Type / Sever URL.
Off
The time server is not used.
NTP
NTP is used to set the time for the time DVR.
{NTP} setup is available when {Time Sync} is set as NTP.
The user can enter the IP only when the server type is DVR. For
the NTP server, Automatic, IP, or URL should be selected.
６-１-２ Date and Time
(1) Date and Time