Cobra Marine MR HH600 FLT GPS BT E - Page 12

VHF Marine Radio Protocols
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your Radio
19
Nothing Comes Close to a Cobra
®
Setup Mode Programming
VHF Marine Radio Protocols
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your Radio
18
English
Setup Mode Programming
Conrmation Key Tone
The Conrmation Tone sounds to conrm all button presses except for the Talk button. If you
would prefer not to hear the Conrmation Tone, you can turn it Off and On as you choose.
To Turn The Conrmation Tone On Or Off:
1. Enter the Settings menu and scroll to KEY TONE
with the Up/Down soft keys or the Up/Down channel
buttons.
2. Press the ENTR soft key and observe the current conrmation
tone setting — ON or OFF.
3. Use the Up/Down soft keys or the Up/Down channel buttons
to switch to the setting you want.
4. Press the ENTR soft key to select the setting. Or press the
EXIT soft key to EXIT without making changes to the Key Tone
setting.
5. The radio will return to the settings menu. The radio will
remember the saved Key Tone setting, when powering off the
radio, or disconnecting power to the radio.
International/Canada/U.S.A. Channel Maps
Three (3) sets of VHF Channel Maps have been established for marine use in International,
Canada, and U.S.A. Most of the channels are the same for all three (3) maps, but there are
denite differences (see table on pages 64 through 78). Your radio has all three (3) maps built
into it and will operate correctly in whichever area you choose.
To Set Your Radio For The Area In Which You Will Be Using It:
1. Enter the Settings menu and scroll to CHANNEL MODE with the
Up/Down soft keys or the Up/Down channel buttons.
2. Press the ENTR soft key and observe the current channel mode
setting — INTERNATIONAL, CANADA or USA.
3. Use the Up/Down soft keys or the Up/Down channel buttons
to switch to the setting you want.
4. Press the ENTR soft key to select the setting. Or press the EXIT
soft key to EXIT without making changes to the Channel Map
setting.
5. The radio will return to the settings menu. The radio will
remember the saved Channel Map setting, when powering off
the radio, or disconnecting power to the radio.
KEYTONE
ON
OFF
EXIT ENTER
Channel Up/Down Buttons
Menu Soft Key
MENU
DSC SETUP MENU
LAMP ADJUST
CONTRAST ADJUST
KEY TONE
UIC CHANNEL MODE
TIME ADJUST
EXIT ENTER
Channel Up/Down Buttons
Menu Soft Key
Time Adjust
All VHF, DSC, and GPS activities use a 24-hour clock and Universal Coordinated Time (UTC)
which was formerly known as Greenwich Mean Time (GMT). Time Adjust uses your built-in
GPS to gather time input. Time Adjust will allow the radio to display the time as Local time
or UTC time. For time input to be converted to local time, you need to enter the hour offset
of your local time zone from Greenwich. (See world city time zone chart on page 81). You
can also choose to have the time displayed in a 12 or 24 hour format.
To Change The Time Offset/Adjustment:
1. Enter the Settings menu and scroll to TIME ADJUST
with the Up/Down soft keys or the Up/Down channel
buttons.
2. Highlight the TIME OFFSET option in the menu.
3. Press the ENTER key and observe the current setting.
4. Use the Up/Down soft keys or the UP/Down channel buttons
to change the setting for your local time zone.
5. Press the ENTER soft key to select the setting. Or press the
EXIT soft key to EXIT without making changes to the Local
Time Zone setting.
6. The radio will return to the Time Adjust menu. The radio will
remember the saved Local Time Zone setting when powering off
the radio. If a TIME OFFSET is saved the time will be displayed
in local time.
MENU
LAMP ADJUST
CONTRAST ADJUST
KEY TONE
UIC CHANNEL MODE
TIME ADJUST
PRIORITY CHANNEL
EXIT ENTER
Channel Up/Down Buttons
Menu Soft Key
TIME OFFSET
SET LOCAL OFFSET
-06:00
EXIT ENTER
MRHH600EU_ENG_MANL.indd 18-19 4/4/17 2:55 PM