DSC Operation
63
If The Station You Called Chose Not To Reply:
NO REPLY will show on your screen.
You will have two (2) choices:
■
RESEND the request.
■
EXIT the Position Request mode.
To Resend Your Position Request:
1. Use the Up/Down buttons to scroll to
RESEND.
2. Press the Call/Set button.
To Exit The Position Request Mode:
1. Use the Up/Down buttons to scroll to
EXIT.
2. Press the Call/Set button to return to the
Individual Directory menu.
3. Use the Up/Down buttons to scroll to
EXIT.
4. Press the Call/Set button to return to the
Call Send menu.
5. Use the Up/Down buttons to scroll to
EXIT.
6. Press the Call/Set button to return to
Standby mode.
Resend The Request
Operating Your Radio
Nothing Comes Close to a Cobra
®
62
English
DSC Operation
6. Press the Call/Set button.
Your radio will send the position request and there
will be one (1) of three (3) possible responses:
■
You will receive the position.
■
You will receive a no position data response,
meaning the station you queried is not connected
to a GPS device and cannot send its position.
■
You will receive a no reply response, meaning the
operator of that station has chosen not to reply
to your request.
Choose one (1) of the following:
If You Receive A Position:
The requested position with the station name
and MMSI will show on your screen.
Press the Call/Set button to return to Standby mode
after you have noted the station’s position.
If The Station You Called Cannot Send Its Position:
NO POS DATA (no position data) will show
on your screen.
1. Press the Call/Set button to return to the
Individual Directory menu.
2. Use the Up/Down buttons to scroll to
EXIT.
3. Press the Call/Set button to return to the
Call Send menu.
4. Use the Up/Down buttons to scroll to
EXIT.
5. Press the Call/Set button to return to
Standby mode.
Operating Your Radio
Receiving a Position
No Position Data
Position Request
To Next Page
Loading...
