24
1/3
2/3
Arrangement of cobra
®
tree cabling systems
You can install cobra breakage cabling systems in accordance with the
connection types specified in "ZTV Baumpflege".
INSTALLATION LEVELS:
Installation at two levels may be appropriate for a
cracked fork or branch. In this case, a static cabling
system is installed at 1/4 the height and a dynamic
cabling system is installed at 2/3 the height of the
branch to be supported.
Installation in the form of one or more
interlinked triangles is ideal for prevent-
ing branches from moving in all load
directions.
Note
Simple cabling
Triangular cabling
Triangular cabling of
4 branches/limbs
Installation position
of dynamic breakage
cabling
Static breakage cabling,
e.g. for a cracked
V-shaped fork
1/3
2/3
To Next Page
Loading...