___________________________________________________________________________________________________
SPYBALL 6808-9/6828-9 35
flash
Three (3) sharp audible
signals follow
flash
One (1) sharp audible signal
follows
“Turn indicator on” audible
warning signal
Press push-button n. 1 of the
transmitter after the third flash
Three (3) sharp audible
signals follow
Press push-button n. 2 of the
transmitter after the third flash
One (1) sharp audible signal
follows
Press push-button n. 1 of the
transmitter after the fourth
flash
Three (3) sharp audible
signals follow
Press push-button n. 2 of the
transmitter after the fourth
flash
One (1) sharp audible signal
follows
Polarity of the instantaneous
alarm trigger input (this is a
DEALER operation !!!)
Press push-button n. 1 of the
transmitter after the fifth flash
Positive polarity
Press push-button n. 2 of the
transmitter after the fifth flash
Negative polarity
Once the selections are finalised, a long low audible sound will confirm that they have been entered
successfully.
Remark 1): it is sufficient to operate when you come to the functions that you wish to modify. It is not
necessary to re-confirm those selections that are already appropriate.
Remark 2): in the event of a mistake, turn ignition off to quit without making any changes.
Remark 3): do not alter the polarity of the instantaneous alarm trigger input (5 flashes) as set up by the
installer, or this protection function will stop working.
Countries. Please check your local regulations and set up the system accordingly.
To Next Page
Loading...
