Cobra XRS 9670 - EasySet Programming Overview; Programming Basics

~ Eas Set Pro rammin
Your Detector
EasySet Programming
All user mode settings on your detector can be changed by using
Program mode. When changing the settings, please keep in mind:
• Buttons can have multiple functions .
•
All settings will be stored in memory when the power is
turned Off and recalled when the power is turned back On.
The procedure for using Program mode is shown on page 7.
<V> NOTE
You cannot enter Program mode during an alert. The unit will not
detect signals while in Program mode. During programming, if no
buttons are pushed for ten seconds, the unit will automatically exit
Program mode and save the last settings.
Programming User Modes
The tables on pages 8 through 9 show you how to program all user modes
and the settings you can choose from.
<V> NOTE
On the following pages, you will find more detailed explanations
of each setting.
See page 14 for instructions on setting the IntelliMute activation point.
See page 17 for instructions on calibrating the compass.
See page 22 for instructions on using SmartPower.
~ English
•