Cobra XRS 9670 - IntelliMute Usage Guidelines; IntelliMute Display Indicators; Setting the IntelliMute Activation Point

~ Settin s '
Your Detector
What to Remember While Using IntelliMute
IntelliMute works with all City and Auto Mute modes.
Whenever engine revs are below the activation point, an arrow
pointing down will appear in the display. Above the activation point,
an arrow pointing up will appear.
Below Activation Point Above Activation Point
NW .:~:. i h
If, for any reason, the unit stops sensing your engine's revs,
IntelliMute will indicate an error and automatically turn Off.
The rev point you set will be stored in the unit's memory when
power is turned Off and recalled each time the power is turned On.
~ ~~eT~ev point must be reset if you use your detector in a different vehicle.
~ NOTE
When initially choosing your IntelliMute activation point, a setting
of approximately 300 to 600 RPMs above idle is recommended.
You can reset the activation point at any time to fit your individual
preferences and driving style.
Setting the IntelliMute Activation Point
Your detector must be installed in your vehicle.
A CAUTION
a& Do not attempt to set the rev point while driving.
Your vehicle should be parked and idling.
IntelliMute must be turned On before setting the activation point.
~ English