Cobra XRS 9670 - IntelliMute Pro Functionality; IntelliMute Pro Overview; IntelliMute Pro On;Off Configuration

~. Settin 5
Your Detector
IntelliMute Pro prevents detection by radar detector detectors (RODs) such
as VG-2, Spectre I and Spectre IVt when traveling at slower speeds. It is
intended for use by experienced users only.
When IntelliMute Pro is turned On, and engine RPMs are below the IntelliMute
activation point, your detector's radar detection circuits are turned Off to
prevent detection by RODs.
Before IntelliMute Pro can be turned On, you must have turned On and Set
the IntelliMute activation point. (See pages 13 through 15.)
. ".,:" .:: ' ...... :'. : .
PAl IT I" '0'· III ..... .. .
A ""V,' ••. '."'< . '.
OOWb~t.t~ll~tePfQ is Qn.RO~darslgriaisWillbedetecte~and
·.NQa.lerts.Will.begiven •.. at· RPMs·belowthe .·lnteUiMute.activafion.point ....
Tone Visual Display
IntelliMute Pro On,
then i blinks in the display
Two beeps
To Turn IntelliMute Pro On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to IntelliMute Pro.
One beep
IntelliMute Pro Off,
then i is steady in the display
IntelliMute Pro On
~ English