Cobra XRS 9670 - VG-2 Detection Settings; VG-2 Detect Mode Configuration; VG-2 Detection Configuration via Program Mode

~ Settin 5
Your Detector
The detector is undetectable by VG-2 detection devices and will alert you when
such a device is in use near your vehicle. During the alert, the unit continues
to detect other signals. You can choose whether or not you want your unit to
show VG-2 Alerts. With VG-2 Detect mode On, you can also
choose whether or not you want your unit to sound audible VG-2 Alerts.
The factory settings are VG-2 Detect Off and VG-2 Detect Audio Off.
Tone Visual Display
VG2 On Two beeps
To Turn VG-2 Detect Mode On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to VG-2 Detect.
One beep VG2 Off
VG-2 Detect On
VG-2
Detect Off
VG2 On VG2 Off
Tone Visual Display
VG2 Audio On
Two beeps
To Turn VG-2 Audio Mode On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to VG-2 Audio.
One beep VG2 Audio Off
VG-2 Audio On
... Audio On
... Audio Off
t20l English