Cobra XRS 9670 - DigiView Data Display Brightness Settings; Display Brightness Modes; Switching Display to Dim Modes; Switching Display to Bright Mode

-~
~ J~ Settin s .
Your Detector
DigiView Data Display Brightness
Your detector has a Bright display mode (for daytime driving) and three
levels of Dim display modes (Dim for dusk driving, Dimmer for night driving
and Dark where no visual alerts will be displayed) to control the display's
brightness levels. The factory setting is Bright. The factory Dim mode
default setting is Dimmer.
Dark Indicator
(i) SelecVDim
Button
To Change the Brightness to Dim
Press and release the
SelectIDim button once. Two beeps
Dim Display
Dim
Dimmer Display
Dimmer
Dark Display
Dark
<0> NOTE
When you change to Dim mode, the unit will enter
whichever dim default mode is set at the time.
To Change the Brightness to Bright
Press and release the
SelectlDim button again.
Bright Display
Bright
Nothing Comes Close to a Cobra- [23)