How to Use / Set-up Device
• Basic Functions
◦ ON/OFF:
to power on your
speaker
to to power off your speaker.
◦ Time setting: while in any mode, press, hold and release “Clock
Set” to check the current time
.
◦ Choose 12-hour or 24-hour modes by using the rotary nob.
◦ Press “Clock Set” to set hour digit by using the rotary nob.
◦ Press “Clock Set” again to set the minute digit by using rotary nob.
◦ Press “Clock Set” one more time to finish and exit clock settings.
Clock settings will be saved automatically if there’s no operations
for 10s.
• Searching and Saving Channels
◦ To enter FM mode press “Mode”.
ress, hold and release “NEXT”
or “BACK” to search and save channels manually.
◦ Press, hold and release “FM Scan” to
. All previous channels data will be cleared before
saving new channels. Note: 20 Channels can be saved at most
after auto searching. Pressing holding and releasing “Alarm Clock
1” or “Alarm Clock 2” can search and save channels manually.
◦ The searching ends when the clock receives a Chanel. When this
happens the Channel number will be displayed on the screen.
Select from available channels by pressing “Alarm Clock 1” or
“Alarm Clock 2” and save the channel by pressing “FM Scan”.
4
To Next Page
Loading...
Need help?
General
