• Play / Pause Button
◦ Briefly press to answer an incoming call.
◦ Press and hold to reject a call.
◦ Double click to resume playing from the connected Bluetooth®
device.
◦ Briefly press to play/pause.
◦ Press and hold to cancel a Bluetooth® pairing or disconnect from
Bluetooth®.
• Volume control: Adjust the volume by rotating the rotary switch.
There are 16 volume grades and the volume will be displayed on the
switch while you adjust.
• Screen brightness: Adjust brightness of screen by pressing and
rotating the rotary knob between the 3 levels of brightness (High, Low,
and off).
• Low voltage alarm: A glowing red light indicates low power. It will
light up when the remaining capacity is below 10%. The speaker will
turn off automatically when the remaining capacity is below 3%.
• Battery level: Green light (sufficient charge) / orange light (medium
charge) / red light (low charge). The speaker will turn off automatically
when the remaining capacity is below 3%.
• Charging mode: The red and green lights will flash when the
speaker is charging. The capacity icon will glow green when the
speaker is fully charged.
• Connecting to Bluetooth®
◦ The below steps are only necessary the first time a device is
connected to the speaker. The speaker will connect to previously
used devices automatically after initial use.
◦ Turn the speaker on and the device display will immediately show
“----”. Bluetooth® mode will turn on after about 2 seconds and the
Bluetooth® icon will flash.
6
To Next Page
Loading...
