What to do if the sound from my Cochlear Recording Equipment microphone isn’t clear?
If the sound from the microphone of your Cochlear Recording Equipment isn’t clear: A) Try shortening the distance between the hearing devices and the microphone. B) Check to make sure that the microphone is not sitting on top of an electrical device, as this can cause interference. C) Ensure all cables are plugged in appropriately.
Why does the streaming signal disappear on my Cochlear Recording Equipment?
The streaming signal might disappear from your Cochlear Recording Equipment because: * You are over 80 feet (25 meters) away from the microphone. If you return within 5 minutes, the hearing devices will reconnect. If not, start streaming again. * The cable connecting the microphone to the audio source is not fully inserted. Make sure to insert the cable completely.
Provides contact information for Cochlear support in different regions.
Instructions for powering the device on/off and understanding status lights/beeps.
How to change listening programs and manage wireless audio streaming.
Information on compatible wireless accessories and Made for iPhone (MFi) features.
Step-by-step guide on how to replace the sound processor's battery.
Critical warnings regarding battery handling and device safety.
Solutions for addressing whistling or feedback sounds from the processor.
Guidelines for reporting serious incidents related to the device.
General| Brand | Cochlear |
|---|---|
| Model | Baha 5 |
| Category | Recording Equipment |
| Language | English |
To Next Page
