Quick Star Guide
HE210303 02/2022
8CH 1080P SECURITY
CAMERA SYSTEM
1. Connect each of the camera extension cables to the video and power connectors.
2. Connect the other end of the extension cables to the pors marked “VIDEO IN” on the back of the
DVR.
3. Connect the 8-way power splitter to each of the extension cable power plugs.
Note: We highly recommend reading the manual in full before testing and installing your business security
system. Test all connections are working before permanently installing DVR and cameras. Position
the DVR in a central location where all 8 cameras will reach. If you are wanting to use your DVR via
mobile and/or PC, install near your router and refer to the user manual for furher instructions on
installation and operation.
To Next Page
Need help?
General
