Calling
Quick Reference Card
Fixed channel operation
To operate on a xed channel:
☐ Go to the channel screen, stop scanning, then select a
channel.
☐ Press PTT to tune the antenna, if required.
Discreet mode switch
Rx/Tx level
indicator
Rx/Tx
indicator
channel
name
status areas
left
software key
right
software key
volume/speaker mode indicator
menu bar
mode
indicator
Tx/Rx
frequency
battery level
indicator
missed
call icon
mute type indicator
(highlighted when mute is on)
call type
indicator
Tx power
setting
Keys
Volume down/up
(when / is present)
Select channel
Scroll up/down/left/right
Menu/action
Selection
Start call
Go to Stations list
End call, start/stop scan
Mute on/off
Manual tune screen
Tune scanned channels
Next speaker mode
Next digital voice rate
Change channel mode
Free tune receive
Toggle frequency hopping
Set transmit power level
Select mute type
Toggle secure or DV
Go to GPS screen
Toggle Channel/Stations screens
Go to Adjust Display Brightness
Functional Select:
Select Preset/Self Tests/Macros
Stations
Call history
Single call
available for
station
Multiple calls
available for
station
Basics
Call Types
Selective Get Status
Message Channel Test
Send Position Phone
Get Position Alert
ALE Sounding SMS
TOD Broadcast TOD Request
Voice Message
Making a Station Call
To make a call using one of your pre-dened stations:
☐ Go to the channel screen, then hold CALL or press Key 0.
Stations
History
single call
available
for station
multiple
calls
available
for station
☐ Scroll to the station that you want to call.
☐ If there are multiple calls available for the station, press or
CALL, then scroll to the desired call type.
☐ Press CALL.
☐ Respond to any prompts, then press CALL.
© Codan Limited 2021 06-03050-EN Issue 2
Press
Hold
Press
Hold
(for 2 sec)
(for 2 sec)
Press
Hold
(for 2 sec)
Pull, then rotate right to
zeroise transceiver
Discreet mode on
(No audio or backlight)
Discreet mode o
To Next Page
Need help?
General