1514
21
22
In case you do want any spacers over the fork a different top cap is
required. Put it over the stem and put the spacers on it.
Make sure at least 2 millimeters of gap are present between the
spacers top and the fork tube. This gap allows for the headset to be
preloaded. The maximun amount of spacers allowed over the fork is
15 millimeters.
23
24
Lock the metallic sleeve and preload the headset with the 5
millimeters Allen key. Insert the multitool into the round top cap the
same way as depicted before.
The round cap stays in contact with the sleeve, not with the spacers.
To Next Page
Loading...