EasyManua.ls Logo

COLORADO Boulder - Table of Recommended Torque Values

COLORADO Boulder
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DESCRIPTION TORQUE
1 A-Head Steerer Clamp Bolts 20Nm
(where fitted)
2 Stem Binder Bolt 15Nm
3 Brake Fixing Bolt (non disc) 5Nm
Applies to both front and rear brake
4 Axle Nut 30Nm
QR Axle 5Nm
5 Chain Wheel Securing Bolt 38Nm
6 Pedal 40Nm
7 F/Derailleur Cable Fixing Bolt 4Nm
8 R/Derailleur Cable Fixing Bolt 4Nm
9 Seat Pin (Allen Head) 20-35Nm
10 Saddle Clamp Bolt 30Nm
11 F/Derailleur Clamp Bolt 5.5Nm
TABLE OF RECOMMENDED TORQUE VALUES
Page 1
1
2
3
4
5
6
7
8
9
10
11
Warranty
Roux bikes are guaranteed against material defects or faults of manufacturing from
the date of the original purchase as follows.
Frame & forks.
Roux frames and forks are warranted against failure or defects for a period of fol-
lowing years.
1 year on double suspension frames.
1 year on suspension forks.
Lifetime on alloy frame & forks.
5 years on rigid carbon frame & forks.
Component Parts
Component parts are warranted against failure or defects for a period of up to one
year.
Note:
1. This warranty applies only to the original owner and is not transferable.
2. Claims under this warranty must be made through the original place of
purchase or an authorised dealer. Proof of purchase is required.
3. This warranty does not apply to damage or failure due to accidents, misuse,
abuse or neglect. Modification of the frame or components shall void this
warranty.
4. This warranty does not cover normal wear and tear, improper assembly by a
third party or poor maintenance or installation of parts or accessories not
originally intended or compatible with the cycle.
This bicycle has been designed to meet or exceed the requirements relevant to its
intended use and categorization within the CEN standard. As part of
this process this
bicycle has been assigned to one of the specific categories.
misuse, modification, or misunderstanding the intended purpose of the bicycle
could result in component failure and potentially serious injury. For your safety and
your warranty vaildation you must use your bicycle correctly and as intended by the
manufacturer.
If you are in any doubt as to the intended use of your cycle you must clarify it with your
retailer before riding.
We recommend a total rider + bike + luggage weight that does not exceed 120Kg.
Although exceeding this may not necessarily be unsafe we do advise you to check your
intended use with your retailer for clarification.
This warranty does not affect the statutory rights of the consumer, in itself this
warranty does not cover incidental or consequential damage.
We recommend you record your cycle serial number stamped on the frame but a far
Page 2
Page 1
Page 2
DESCRIPTION TORQUE
1 A-Head Steerer Clamp Bolts 20Nm
(where fitted)
2 Stem Binder Bolt 15Nm
3 Brake Fixing Bolt (non disc) 5Nm
Applies to both front and rear brake
4 Axle Nut 30Nm
QR Axle 5Nm
5 Chain Wheel Securing Bolt 38Nm
6 Pedal 40Nm
7 F/Derailleur Cable Fixing Bolt 4Nm
8 R/Derailleur Cable Fixing Bolt 4Nm
9 Seat Pin (Allen Head) 20-35Nm
10 Saddle Clamp Bolt 30Nm
11 F/Derailleur Clamp Bolt 5.5Nm
TABLE OF RECOMMENDED TORQUE VALUES
Page 1
1
2
3
4
5
6
7
8
9
10
11
DESCRIPTION TORQUE
1 A-Head Steerer Clamp Bolts 20Nm
(where fitted)
2 Stem Binder Bolt 15Nm
3 Brake Fixing Bolt (non disc) 5Nm
Applies to both front and rear brake
4 Axle Nut 30Nm
QR Axle 5Nm
5 Chain Wheel Securing Bolt 38Nm
6 Pedal 40Nm
7 F/Derailleur Cable Fixing Bolt 4Nm
8 R/Derailleur Cable Fixing Bolt 4Nm
9 Seat Pin (Allen Head) 20-35Nm
10 Saddle Clamp Bolt 30Nm
11 F/Derailleur Clamp Bolt 5.5Nm
TABLE OF RECOMMENDED TORQUE VALUES
Page 1
1
2
3
4
5
6
7
8
9
10
11
1
2
3
4
5
6
78
9
10
11