Need help?Do you have a question about the Colormetrics P3300 and is the answer not in the manual?
General| Brand | Colormetrics |
|---|---|
| Model | P3300 |
| Category | Touch Panel |
| Language | English |
Lists the standard accessories included with the system, often with images.
Details optional accessories available for purchase and integration with the system.
Diagrams labeling the components on the front and rear of the P3300 system.
Technical details including processor, memory, display, and physical dimensions.
Defines pinout for the COM 5 connector used for the touch panel.
Details pinout for the Parallel Port J1 connector, including printer signals.
Specifies pinout for the Line-out port (J3), detailing audio and ground connections.
Defines pinout for the VFD connector CN9, including serial data and power.
Details pinout for the microphone port, including ground and mic signals.
Specifies pinout for speaker ports SPK1 and SPK2, indicating positive and negative connections.
Details pinout for the LVDS connector CN2, used for display signals.
Defines pinout for the Inverter connector C14, related to backlight control.
Details signal and function for each pin of COM1 and COM2 serial ports.
Specifies pin assignments for the RJ45 connector used with the VFD display.
Defines pinout for the VGA port, including video, sync, and monitor ID pins.
Details pinout for USB ports, including power, data, and ground connections.
Specifies pinout for the PS/2 port used for keyboards and mice.
Defines pinout for the LAN port, showing wire colors and connection types.
Details pinout for RJ11 port for cash drawers, including signals and commands.
Specifies pinout for the DC power jack, indicating 19V input and ground.
Defines pinout for eSATA and USB connector, detailing data and power pins.
Step-by-step guide for installing or removing the Hard Disk Drive (HDD).
Instructions for installing or removing memory modules from the system.
Guide for installing or removing the Magnetic Stripe Reader (MSR) module.
Steps for installing the Vacuum Fluorescent Display (VFD) unit.
Instructions for installing an optional second Hard Disk Drive kit.
Guide for installing the 8-inch secondary monitor.
Instructions for installing or securing the power adapter to the system stand.
Steps for installing barcode scanners, i-Button, and RFID readers.
Guide for installing the driver for the resistive and capacitive touch panel.
Instructions for installing and using the utility to configure the MagStripe card reader.
Steps for installing the driver and SDK for the fingerprint reader.
Guide for installing the driver for the RFID reader.
Instructions for installing and using the utility to configure the i-Button reader.
Steps for installing the driver and testing the smart card reader.
Details configuration options available in the Advanced BIOS menu.
Configures Advanced Configuration and Power Interface (ACPI) options.
Enables or disables system wake on alarm events.
Configures CPU information and parameters.
Configures SATA devices, including mode, ports, and hot plug.
Configures internal graphics device settings.
Configures USB settings, including legacy support and device enumeration.
Configures parallel and serial ports via the Super IO controller.
Configures the parallel port settings.
Displays system temperature and fan speeds.
Accesses Northbridge and Southbridge configuration menus.
Configures the Northbridge chipset, including memory and graphics adapter.
Configures the Southbridge chipset, including AC power loss and serial port voltage.
Configures the Intel Management Engine (ME) options.
Configures system boot options, including boot order and NumLock state.
Sets system and user passwords for BIOS access.
Loads default values, saves changes, and exits the BIOS setup utility.
Provides instructions on how to clean the LCD screen without causing damage.
Lists the recommended supplies for cleaning the LCD screen.
Lists acceptable and unacceptable cleaning agents for LCD screens.
To Next Page