Need help?Do you have a question about the ComAp Adoucisseur softeo and is the answer not in the manual?
General| Brand | ComAp |
|---|---|
| Model | Adoucisseur softeo |
| Category | Water Dispenser |
| Language | English |
Lists essential accessories needed for the water softener installation process.
Steps for connecting the brine evacuation hose to the drain.
Procedure for connecting the overflow outlet to the drain system.
Steps for installing the bypass unit onto the water softener head.
How to set the current time on the water softener's control unit.
Instructions for adjusting the automatic regeneration recharge time.
How to select the operating mode for the regeneration cycles.
Configuring the interval between automatic regeneration cycles.
Details on setting specific times for backwashing, brine rinse, refilling, and rinsing.
How to configure the volume of water treated before regeneration.
Inputting the computed value for residual water into the softener settings.
Covers initial steps like measuring hardness, adding water/salt, and setting parameters.
Ensures correct electrical connection, bypass, and inlet/outlet setup before operation.
Procedure to initiate and monitor the water softener's automatic recharge process.
Details on periodic checks and actions for maintaining the softener.
Troubleshooting issues related to the control valve of the softener.
Details the terms and validity requirements for the product guarantee.
Lists situations and conditions that void the product guarantee.
To Next Page
