- 6 -
Attaching the Booster Seat to a Chair
Adjusting the Booster Seat Height
1. Undo the hook and loop fasteners on the straps
underneath and behind the Booster Seat.
2, Place the Booster Seat on the chair. Be sure that the chair
is wide enough to accommodate the Booster Seat. Make
sure the legs of the Booster seat fit properly on the chair
and don't hang off the sides of the chair.
3. Route the straps underneath the chair's seat and fasten
the straps together as shown in figure 14.
4. Pull the strap tight to ensure the Booster seat is secured
to the chair's seat as shown in figure 15.
5. Route the straps around the chair's backrest and fasten
the straps together as shown in figure 16.
6. Pull the strap tight to ensure the Booster seat is secured
to the chair's seat just like in figure 15.
7. Lift Booster gently to ensure proper attachment.
1. Press in the height adjustment button on one side of the
Booster Seat and pull the leg down to the desired position
as shown in figure 12.
2. Release the button and ensure the Booster Seat leg is
locked into position.
3. Repeat this process for the other side.
1. Press in the height adjustment buttons on each side and
push the Booster Seat down as shown in figure 12a.
figure 12a
figure 12
figure 13
figure 14
figure 15
Raising the Height
Lowering the Height
figure 16
To Next Page
Loading...