NC
SW DIP-4
2
SW2
FACTORY SETTING
1 2 3 4
SW DIP-2
IR-78
PIR
100R
NC
NC
DM-03S-1P
POT
1M
1K
2.61K
845R
3.48K 2.61K
3.48K
1K
HEADER 2X4
HEADER 2X4
HEADER 2X4
HEADER 2X2
BLOCK 10
365R
365R
845R
SW1
FACTORY SETTING
1 2
SW1
MW sensitivity
PIR sensitivity
Anti mask module
connector
MW antenna
PIR sensor
1 Assembly description
The DT12EAM is a robust yet small detector which includes a large LED indicator that can be
easily observed from long distances to provide indication of intrusion. Using the supplied
mounting bracket, the DT12EAM can be easily mounted to walls using the provided mounting
screws. For installations requiring the detection beam to be adjusted horizontally or vertically to
obtain the desired field of protection use the Outdoor Mounting Bracket pictured below. (not
included)
DT12EAM Outdoor Motion Detector Outdoor Mounting Bracket
The DT12EAM consists of two detection elements:
PIR element
Microwave element
To Next Page
Loading...