Need help?Do you have a question about the Comelit VEDO 2.6 Series and is the answer not in the manual?
General| Operating Voltage | 12 VDC |
|---|---|
| Storage Temperature | -20°C to +60°C |
| Housing Material | Plastic |
| Series | VEDO 2.6 |
| Display | TFT LCD |
| Humidity | 10% to 90% non-condensing |
| Weight | 500g |
| Compatibility | Comelit |
Details system requirements and installation procedure for Safe Manager software.
Guides on launching Safe Manager for the first time and selecting software language.
Instructions to modify the software's display language via the Options menu.
Explains how to connect a PC to the VEDO series control panel via USB or TCP/IP.
Procedure to check the currently installed firmware version of the control panel.
Steps to create a new system archive and configure basic project settings.
Procedure for saving the current system configuration for servicing or updating.
Instructions on how to open previously saved system configuration files.
Details on how to print the project configuration or parts of it in PDF format.
Process for exporting a system configuration file for use on other PCs or archiving.
Guide on how to import a system configuration file into Safe Manager.
How to transfer configuration parameters between PC and control panel.
Procedure for sending voice messages (service/free/control) to the control panel.
Instructions for downloading the control panel events log for analysis.
Process to reset the access code cache in Safe Manager memory.
Information on enabling installer access for system configuration.
Manages end-user devices like Keypads, Safetouch, RFID readers, Phone App, and Bridge.
Configuration of bus expansions, including input/output modules and power supply units.
Parameters for radio expansions, managing wireless sirens, sensors, and outputs.
Management and parameter configuration for wired sensors and zones.
Configuration of virtual zones based on AND logic for multiple real zone conditions.
Configuration of system areas, including timers and activation functions.
Configuration of physical outputs on the control panel and expansion modules.
Management of up to four events per output, grouped for complex logic.
Configuration of activation statuses for areas and system scenarios.
Covers configuration and programming of user, installer, and remote control codes.
Management of user codes, authorisations, and associations with devices.
Configuration of installer codes and their associated permissions.
Defines individual function permissions for different user types.
Procedure for closing system control sessions on various devices.
Acquiring and assigning RFID digital keys to users.
Configuration of IP, GSM, PAL/IP video, and Cloud communication options.
Settings for telephone, digital communicator, generic events, and voice messages.
Configuration of timers and timed activations for system operations.
Global system settings including expansions, control devices, and system times.
Recording, analysis, and saving of system events.
Function to check the system status and parameters in real time.
Verifies system configuration against EN50131 Grade 2 standards.
Procedure for configuring router ports for remote access to the control panel.
Steps to register a VEDOIP expansion device for remote access using Comelit DNS.
Parameters required for EN50131-1 Grade 2 certification.
Specific configurations needed to guarantee INCERT certification.
Defines actions assignable to function keys on devices.
Configuration options for the device buzzer behavior.
General settings for sending SMS, email, digital communication, and app notifications.
Customising scenario activation behaviour and output timing.
Mapping events to telephone numbers for detailed message transmission.
Setting logic for associating multiple events for output activation.
Defines output types (Monostable/Bistable) and their operational behaviour.
Lists events managed by different system components like Zones, Keypads, RFID.
Setting time periods and calendars for timer activation.
To Next Page
