Comet MTP MC 25 - SPECIFICATIONS AND TECHNICAL DATA

24
emanualmustbedeemedanintegralpartofthemotorpumpandmustbelookedaerforfuturereference
andkeptinaprotectedplacewhereitcaneasilybereferredtoincaseofneed.
e manual contains safety precautions for the operator and those surrounding him/her and for the protection
of the environment.
Incaseofdeteriorationorloss,anewcopymustberequestedfromtheManufacturerorfroma
Skilled
Technician
.
Intheeventofthemachineinwhichthemotorpumpisintegratedbeingtransferredtoanotheruser,please
alsoincludethismanualandanymanualforthecombustionengineequippingthemotorpump.
eManufacturerreservestherighttomakealltheamendmentsrequiredtoupdateandcorrectthispublication
without prior notice.
SYMBOLS
e symbol: WARNING
markingcertainpartsofthetextindicatesalikelychanceofinjurytopersonsunlesstherelativeprescriptions
and indications are followed.
e symbol:
CAUTION
markingcertainpartsofthetextindicatesthepossibilityofdamagingthemotorpumpunlesstherelative
instructions are followed.
SPECIFICATIONS AND TECHNICAL DATA
emotorpumpsconsistofadiaphragmpumporpistonpump(MTPYA65only)completewithrelative
control unit (alsosee “safety devIces” paragraph),coupledtoanelectricmotor(singlephaseiftheplateshows
theMNFcode;threephaseiftheplateshowstheTRFcode)orcombustionengine(2-strokeiftheplateshows
the2Tcode;4-strokeiftheplateshowsthe4Tcode).
Motor pump
with electric motor
Motor pump
with combustion engine
POWER SUPPLY/FUEL Power voltage, frequency
and power are shown on
the plate(12).
The fuel to be used is shown in
the engine manual.
PUMP OIL
•MTPMC8-MTPMC18 AGIP Blasia S 150
(*)
•MTPYA65 AGIPROTRAMULTITHT
(**)
•Othermotorpumps AGIPMOTOROILHD20W/40
(***)
REDUCTION GEAR LUBRICANT
•MTPMC8-MTPMC18 - GreaseAGIPGREASECT0
•MTPMC20/20-MTPMC25 AGIPMOTOROILHD20W/40
(***)
•Othermotorpumps AGIPROTRAMULTITHT
(**)
HYDRAULIC CONNECTION
Max water supply temperature
•MTPYA65 60°C-140°F
•Othermotorpumps 40°C-104°F
Min water supply temperature 5°C-41°F
Max water supply pressure
•MTPYA65 0,8MPa-8bar-116psi
•Othermotorpumps 0,01MPa-0,1bar-1,45psi
Max priming depth
•MTPMC8-MTPMC18-MTPMC20/20-MTPMC25 1,0m-3,3ft
•MTPYA65 1,5m-4,9ft(3,5m-11,5ftforperiodsofnolongerthan10-15min)
•Othermotorpumps 1,0m-3,3ft(3,0m-9,8ftforperiodsofnolongerthan10-15min)
(continued on next page)