This document describes a Comfee Washing Machine, specifically models CV23DPWBL0RC0 and CV35DPWBL0RC0. It serves as an owner's manual, providing instructions for installation, operation, and maintenance.
Function Description:
The Comfee Washing Machine is designed for household laundry, offering various wash cycles and options to clean different types of fabrics and soil levels. It features a top-loading design with a pulsator for agitation. The machine is equipped with an automatic error-monitoring system to detect and diagnose problems.
Important Technical Specifications:
- Power: AC 120V/60Hz, requiring a 15-amp or higher circuit breaker/fuse.
- Water Pressure: 14 to 70 psi (100 to 500 kPa) is required for proper filling.
- Drain Standpipe Height: Recommended 35 inches (90 cm), with a range of 32 inches (81 cm) to 39 inches (100 cm).
- Dimensions (CV23DPWBL0RC0):
- Width: 21.7 inches (550 mm)
- Depth: 22.2 inches (565 mm)
- Height (lid closed): 37.0 inches (940 mm)
- Height (lid open): 53.1 inches (1350 mm)
- Dimensions (CV35DPWBL0RC0):
- Width: 23.7 inches (601 mm)
- Depth: 24.8 inches (630 mm)
- Height (lid closed): 39.4 inches (1000 mm)
- Height (lid open): 56.34 inches (1430 mm)
- Clearances for Closet/Alcove Installations:
- Sides: 1 inch (2.5 cm)
- Rear: 6 inches (15.2 cm)
- Closet Front: 2 inches (5.1 cm)
- Top: 24 inches (61 cm)
- Closet door ventilation: Minimum 48 in² (310 cm²) at the top and 24 in² (155 cm²) at the bottom.
- Detergent Type: High-Efficiency (HE) powder detergent only.
Usage Features:
- Control Panel: Features buttons for ON/OFF, START/PAUSE, Extra Rinse, Program selection, Control Lock, Temperature, Load Size, Delay Start, and a Digital Display.
- Wash Programs: Includes Normal, Heavy, Delicate, Quick, Bulky, and Spin Only. Each program can be selected with different load sizes (Large, Medium, Small) and temperature settings (Hot, Warm, Cold).
- Cycle Steps: Users can select specific steps within a cycle: Soak, Wash, Rinse, and Spin. By default, all steps are included.
- Temperature Settings: Allows selection of water temperature for the washing action (Hot, Warm, Cold). Rinsing action is cold water only for all cycles.
- Load Size: Determines the water level for all steps in the cycle.
- Delay Start: Enables users to set a desired time to delay the start of the wash cycle, up to 24 hours.
- Digital Display: Shows estimated minutes for the wash cycle or counts down hours for Delay Start.
- Control Lock: A safety feature to prevent children from changing the unit's operation status. Activated by pressing and holding "Temp" and "Program" buttons simultaneously. Only the POWER button and the ability to deactivate Control Lock function when activated.
- Adding Forgotten Items: The cycle can be paused to add items by pressing START/PAUSE, waiting for the tub to stop, opening the lid, adding the item, closing the lid, and pressing START/PAUSE again.
- Detergent Dispenser: Designed for HE powder detergent. Users are advised to use 1/4 to 1/2 of the maximum recommended amount, reducing for small or lightly soiled loads, or soft water. Liquid bleach should not be poured directly onto the load.
- Water Supply: Requires both hot and cold water faucets to be connected for correct water usage, though cold water can be selected as the wash temperature if only one supply is available (using the water intake cap for the unused hot water inlet).
- Drain Hose: Can be positioned over a wash basin, in a standpipe, or in a laundry tub, ensuring it is not airtight.
Maintenance Features:
- Exterior Cleaning: Turn off water faucets after use. Leave the lid open to dry the interior. Wipe up detergent/bleach spills with a soft cloth. Clean the control panel with a soft, damp cloth; avoid abrasive cleaners.
- Interior Cleaning: Periodically clean the tub to remove dirt, odor, mold, mildew, or bacterial residue. Running an Express cycle with bleach once a month is recommended for tub cleaning and mold prevention.
- Lint Filter Clean: The washer has a built-in lint filter that should be cleaned every 10 cycles. It is removable for cleaning with water.
- Pump Filter Clean: A built-in pump filter protects the pump and should be cleaned once every month. It is also removable for cleaning with water.
- Troubleshooting Guide: The manual includes a comprehensive troubleshooting section with common problems, possible causes, and solutions, such as thumping sounds, vibrating noise, excessive sudsing, water leaks, wrinkling, staining, and issues with filling or draining water.
- Error Codes: Provides a list of error codes (E1, E2, E3, E4, XX) and their corresponding possible causes and solutions, guiding users on how to address issues like water filling/draining problems, open lid, or unbalanced loads.
- Storage: For extended storage or relocation, unplug the washer, drain remaining water, and disconnect water inlet hoses.
- Installation Check: Includes a test cycle after installation to ensure proper function, checking for excessive rocking, vibration, and proper draining.
Need help?
To Next Page
General
