5
Technical Date of the Product
How to use
Model No.
Rated voltage CapacityRated power Dimensions
120V~ 60Hz 1.2L1500W 85x145x226mm
MK-12S07A
For the first time to use or no use for a long time, it is recommended that you
fill to the maximum level mark with fresh tap water, boil and empty the kettle
at least 2 times to clear kettle of any tiny particles. Do not drink such water.
1. Press the lid lock on the handle, and you can open it.
2. Remove the kettle from the base to the filling place. Fill the kettle with
desired amount (no less than the minimum and no more than the
maximum.) Put back the lid; place the ket
tle back on the base unit.
3. Connect the plug into a power outlet (120V, AC), switch the kettle on by
pressing the switch. The light will illuminate to indicate the kettle is
heating.
4. The kettle will automatically switch off once the water has boiled and the
neon light goes off.
5. Lift the kettle from the base, and you can pour out the water into
container.
6. Correct Operation of Pouring Water: slowly lean the kettle to the right
angle(no larger than 90 derees ) to keep water pouring smoothly and
steady.
Weight
0.9kg
To Next Page
Loading...
General